SS Traders
30+ years in the steel trade Karachi, Pakistan
SS Traders logo — steel and iron products, Karachi SS Traders Steel & Iron
  1. Home
  2. Products
  3. Cable Tray

Cable Tray

Perforated, ladder and solid-bottom tray for routing cable through factories, plants and commercial buildings — with the bends, tees, reducers and covers that make a run work.

Specification

Cable Tray: sizes and grades we hold

Types
Perforated, ladder, solid bottom
Widths
50, 100, 150, 200, 300, 450, 600 mm
Thickness
1.0–2.0 mm
Finish
Pre-galvanised or hot dip galvanised
Length
2.4 m standard
Accessories
Bends, tees, reducers, covers, couplers
Typical uses

Uses for Cable Tray

  • Factory and plant cable routing
  • Commercial building electrical work
  • Data and control cabling
  • Solar plant DC and AC runs
  • Substation and switchroom installations

Tray is specified by width and by the load it has to carry. Tell us the cable bunch and the support spacing and we will point you at the right thickness rather than the cheapest sheet.

For anything outdoors or in a damp plant, hot dip galvanised is the finish that lasts. Pre-galvanised is fine indoors and costs less; using it outside is a false economy.

How it works

From enquiry to delivery

Four steps, no forms and no account to open.

1

Send the size

WhatsApp the size, grade and tonnage. A photo of the drawing or the old challan works just as well.

2

Get the rate

A per-ton or per-piece figure the same day, with freight quoted separately so you can see both.

3

Confirm and weigh

Material is pulled, tagged and crossed over the weighbridge. The weight on the bridge is the weight on the challan.

4

Loaded and gone

Karachi same or next day where stock allows. Up-country dispatch to Lahore, Multan, Islamabad and beyond.

Questions

Before you order

Most sizes on this page are held. Where something is not, we source it from the mill or the market and tell you the day it lands rather than promising same-day and going quiet.

There is no formal minimum. We sell single lengths and full trailers, though the rate improves with tonnage and freight makes very small out-of-city orders expensive.

Yes, on most sections. Send the cutting list with the enquiry and the cut lengths are quoted with the material rather than added as a surprise afterwards.

WhatsApp the size, grade and tonnage to 0334 8398777. You will have a workable number the same day, and a firm one once we confirm what is on the floor.

Get a rate

Cable Tray rate in Karachi today

Message the size, grade and tonnage and you will have a rate back the same day. Rates move with the mill and the dollar, so we confirm on the day rather than publish a figure that goes stale by the afternoon.

Chat on WhatsApp