MS Deformed Bars (Sariya)
Ribbed reinforcement bar for RCC slabs, columns, beams and footings. Grade 40 for general work, Grade 60 where the structural drawing calls for it.
- 10, 12, 16, 20, 25, 32 mm
- Grade 40 / 60
- 40 ft standard
- ASTM A615 / PS 1879
- Home
- Products
Steel & iron products, with the sizes we actually carry
Thirteen product families, from 10 mm sariya to 8 inch pipe. Sizes below are the ones that move regularly in Karachi — if yours is not listed, ask anyway. We source outside the standard list often enough.
Product list
Every steel product we stock in Karachi
The full list, grouped the way the market groups it. Tap any line for sizes, grades and weights, or send us the list as it is and we will price it against today’s rate.
Flat products
Pipes & tubes
Rates move with the mill and the dollar, so nothing is priced on this page. Send your list and you will get today’s number against every line.
MS Round Bar
Plain round bar stock for turning, forging, grill work and general fabrication. Cut lengths available on the larger sizes.
- Round 6–100 mm
- Square 8–50 mm
- Flat 20×3 to 150×12
MS Plates & Sheets
Hot rolled plate for structural and tank work, cold rolled sheet where finish matters. Standard 8×4 ft, or cut to your size.
- 0.6–25 mm
- 8×4 ft / cut size
- HR & CR
- ASTM A36
HR & CR Coil
Hot rolled and cold rolled coil for pipe mills, profilers and press shops. Full coil or slit to the width you run.
- Width to 1250 mm
- Slitting available
- Q195–Q235B
GI Plain & Corrugated Sheets
Zinc-coated sheet that holds up in Karachi's coastal air. Plain for ducting and fabrication, corrugated for roofing and boundary sheeting.
- 22–30 gauge
- Z80–Z275 coating
- 6–12 ft lengths
- JIS G3302
Chequered Plate
Anti-slip patterned plate for stair treads, platforms, ramps and truck bodies. Diamond and teardrop patterns.
- 2–8 mm
- 8×4 ft
- Diamond pattern
MS Round Pipes
Light, medium and heavy gauge round pipe for water supply, railings, scaffolding, poles and structural bracing.
- ½″ to 8″
- Light / medium / heavy
- Black or galvanised
Cable Tray
Perforated, ladder and solid-bottom tray for routing cable through factories, plants and commercial buildings — with the bends, tees, reducers and cov
- Perforated, ladder, solid bottom
- 50, 100, 150, 200, 300, 450, 600 mm
- 1.0–2.0 mm
Z Purlin
Roll formed Z and C section purlin for shed roofs, godowns, warehouses and solar structures — lighter than hot rolled channel for the same span, and c
- Z purlin and C purlin
- 100, 150, 200, 250, 300 mm
- 1.5 mm to 3 mm
Corrugated Sheets
Profiled zinc-coated sheet for roofs and walls — the covering on most sheds, godowns and factory buildings in Karachi, and the product where coating w
- 0.35–1.6 mm (22–30 gauge)
- Z80, Z120, Z180, Z275
- 6, 8, 10, 12 and 14 ft
Slit Coil & Strip
Coil slit to the width your line runs on, rather than the width the mill happened to roll. HR, CR and GI, rewound and banded, so a pipe mill or roll f
- HR, CR and GI
- 0.4 mm to 6 mm
- From 20 mm upward
PPGI Colour Coil & Sheet
Pre-painted galvanised coil — PPGI — is galvanised steel with a baked paint system on top. It goes onto roofs, walls, shutters and panel l
- 0.25 mm to 1.2 mm
- Z60 to Z180 galvanised
- Polyester, SMP, PVDF on request
Quick reference
Standard weights buyers ask for
Nominal figures at 7,850 kg/m³. Useful for estimating a load before you order — for an exact figure on your own sizes, use the weight calculator.
| Size | kg per metre | kg per 40 ft bar | Bars per ton |
|---|---|---|---|
| 10 mm | 0.617 | 7.52 | 133 |
| 12 mm | 0.888 | 10.83 | 92 |
| 16 mm | 1.578 | 19.24 | 52 |
| 20 mm | 2.466 | 30.07 | 33 |
| 25 mm | 3.853 | 46.98 | 21 |
| 32 mm | 6.313 | 76.97 | 13 |
| Thickness | kg per m² | kg per 8×4 ft sheet |
|---|---|---|
| 1 mm | 7.85 | 23.3 |
| 2 mm | 15.70 | 46.7 |
| 3 mm | 23.55 | 70.0 |
| 5 mm | 39.25 | 116.7 |
| 6 mm | 47.10 | 140.0 |
| 10 mm | 78.50 | 233.4 |
| Section | kg per metre | kg per 6 m length |
|---|---|---|
| 25 × 25 × 3 | 1.11 | 6.7 |
| 40 × 40 × 5 | 2.94 | 17.6 |
| 50 × 50 × 5 | 3.73 | 22.4 |
| 50 × 50 × 6 | 4.43 | 26.6 |
| 75 × 75 × 6 | 6.78 | 40.7 |
| 100 × 100 × 8 | 12.06 | 72.4 |
| Section | kg per metre | kg per 6 m length |
|---|---|---|
| 25 × 25 × 1.5 | 1.11 | 6.6 |
| 40 × 40 × 2 | 2.39 | 14.3 |
| 50 × 50 × 2 | 3.01 | 18.1 |
| 75 × 75 × 3 | 6.78 | 40.7 |
| 100 × 100 × 3 | 9.14 | 54.8 |
| 100 × 100 × 4 | 12.06 | 72.4 |
On the floor
Steel stock held on our Karachi floor
Everything on this page is held, cut and loaded here in Karachi.
How ordering works
Four steps, no paperwork games
Send the specification
Size, grade, thickness and tonnage on WhatsApp. A photo of a drawing or an old challan works just as well.
Get the rate the same day
We confirm what is in stock, quote the per-ton or per-piece price, and tell you the freight if it is going up-country.
Confirm and pay
Payment terms are agreed up front. Nothing is loaded until both sides know exactly what the number is.
Dispatch and check
Material leaves with a challan listing grade, size and weight. Match it to the tag before you unload — that is the point of it.
“Send a photo of the drawing if it is easier than typing. We have read enough site sketches over thirty years to know what you mean.”
AH
Ali Hayat
Director, SS Traders
Director, SS Traders
Not sure of the grade?
Tell us what the material is for — a slab, a gate, a roof, a tank — and we will tell you what is normally used for it in Pakistan, and what it will cost you either way.
Ask on WhatsAppHave a size list ready?
Paste it into WhatsApp exactly as it is written on your BOQ. We will price it line by line.